What are you looking for?
MEMS Oscillators
Programmable quartz oscillator
High stability、Low power
RoHS, REACH Status: Compliant
Any frequency between 1MHz to 108MHz accurate to 6 decimal places
| Parameter | 1.8V | 2.5V | 3.3V |
| Frequency Range | 1MHz to 108MHz | 1MHz to 108MHz | 1MHz to 108MHz |
| Supply Voltage Variation (Vdd)10% | 1.62 V to 1.98 V | 2.25 V to 2.75 V | 2.97 V to 3.63 V |
| Standby Current | 15μA | ||
| Frequency Tolerance | ± 20 ppm, ± 25 ppm, ± 50 ppm, or specify | ||
| Output Load | 15pF, or specify | ||
| Operating Temperature Range | - 40 ~ + 85 ℃, or specify | ||
| Storage Temperature Range | -55 ~ +125 ℃ | ||
| Voltage Vol ( Max. ) / Vol ( Min. ) | VOH=90%Vdd / VOL / =10%Vdd | ||
| Duty Cycle | 45~ 55% | ||
| Start-up Time | 10msMax. | ||
| Frequency Aging ( at 25 ℃ ) | ± 3 ppm / year Max | ||
| Oscillator | Series | Dimensions (mm) |
Frequency (Hz) |
Voltage (V) |
Stability (ppm) |
Output | Pin | Material | Operating Temp |
- | Remark |
| O | P | 7.5 x 5.0 | 108M | E | D | A | 4 | S | I | - | * |
| Pin | Symbol | Functionality | |
| 1 |
OE/ST/NC | Output Enable |
H : specified frequency output
L : output is high impedance. Only output driver is disabled.
|
| Standby |
H : specified frequency output
L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to I_std.
|
||
| No Connect | Any voltage between 0 and Vdd or Open : Specified frequency output. Pin 1 has no function. | ||
| 2 | GND | Power | Electrical ground |
| 3 | OUT | Output | Oscillator output |
| 4 | VDD | Power | Power supply voltage |
Voltage : 1.8V, 2.5V, 3.3V
Frequency : 1MHz-108MHz
Dimension : 2.5 x 2.0 x 0.8 mm 3.2 x 2.5 x 0.9 mm 5.0 x 3.2 x 1.2 mm 7.0 x 5.0 x 1.4 mm
Operating Temp :
Frequency Tolerance : ±20ppm ±25ppm ±50ppm
Output : CMOS
