Not Enough Clock Outputs? YXC Multi-Output Clock Distribution Solution

In 5G communications, industrial control, and high-speed data acquisition systems, devices such as ADCs, DACs, and FPGAs often require multiple clock signals. When the available clock outputs are insufficient, designers may need to choose between adding independent oscillators and expanding the outputs through a clock buffer.

For systems requiring multiple clocks derived from a common source, a clock generator combined with a clock buffer can provide a practical balance of frequency configuration, output count, and clock-signal quality.

SYNK (Xinghe Semiconductor), YXC's clock IC brand, offers a combined solution featuring the SYKG1021E programmable clock generator and the SYKB23F04 clock buffer. Together, they support flexible clock generation and multi-output distribution.

01 | SYKG1021E Programmable Clock Generator: Flexible Clock Generation

The SYKG1021E is a low-jitter programmable clock generator. Its output frequencies can be configured according to system requirements, allowing it to provide the clock signals required by different devices.

Key Features

  • ● Flexible frequency configuration: Supports frequencies from 1 to 333.33 MHz, with independent output dividers for different frequency requirements.
  • ● Multiple outputs: Provides two differential outputs and one LVCMOS output.
  • ● Low jitter: Typical RMS jitter of 230 fs at 100 MHz.
  • ● Multiple output formats: Supports LVDS, LP-HCSL, HCSL, and LVCMOS.
  • ● Compact package: 16-pin LGA package measuring 3.0 × 3.0 × 1.1 mm.
  • ● Flexible programming: Supports I²C, OTP, and pin control, with four OTP configurations for different development and application requirements.

The SYKG1021E handles clock-frequency generation and configuration. However, when several devices require clocks at the same frequency and the available outputs are insufficient, additional clock distribution is needed.

02 | SYKB23F04 Clock Buffer: One Input, Multiple Outputs

The SYKB23F04 is a low-additive-jitter clock buffer designed to fan out an input clock to multiple outputs. It is suitable for systems in which several downstream devices require clocks at the same frequency.

Key Features

  • ● Multiple outputs: Provides four differential outputs and one LVCMOS output for multi-channel clock distribution.
  • ● Low additive jitter: Typical additive jitter of 34 fs in LP-HCSL mode.
  • ● Multiple output formats: Supports LVPECL, LVDS, LP-HCSL, and LVCMOS.
  • ● Flexible clock input: Accepts either differential or single-ended clock inputs.
  • ● High-frequency operation: Differential outputs support frequencies up to 3.1 GHz.
  • ● Clock switching: The G version supports synchronous, glitch-free switching for designs requiring clock-source selection.

Unlike an architecture using multiple independent oscillators, the SYKB23F04 expands the number of clock outputs through fanout, allowing multiple outputs to share the same upstream reference source.


03 | Combined Application: From One Reference Clock to Four Differential Outputs

For example, a 5G base station radio unit may require multiple 122.88 MHz clock signals. The SYKG1021E and SYKB23F04 can be used in the following architecture:

30.72 MHz reference clock → SYKG1021E generates a 122.88 MHz differential clock → SYKB23F04 distributes four 122.88 MHz differential clocks → downstream clock receivers

In this architecture, the SYKG1021E performs frequency synthesis and clock generation, while the SYKB23F04 distributes the generated clock to multiple devices. This combination provides several benefits:

Common-Source Clock Distribution

All four outputs share the same upstream reference source. This avoids the free-running frequency differences that can occur when multiple independent oscillators are used and helps simplify system-level clock planning.

Flexible Configuration and Expansion

The clock generator supports programmable frequency configuration, while the clock buffer provides multi-output fanout. The two devices can be combined according to the required frequencies and number of outputs.

Low-Jitter Clock Generation and Distribution

Combining a low-jitter clock generator with a low-additive-jitter clock buffer helps control the additional jitter introduced during clock generation and distribution. This makes the solution suitable for applications with demanding clock-quality requirements.

In an actual design, engineers should also evaluate phase jitter, output skew, interface levels, signal integrity, and the clock requirements of downstream devices.


04 | Product Selection Overview

Product Category Key Features
SYKG1021E Programmable Clock Generator 1–333.33 MHz, 2 differential outputs + 1 LVCMOS output, low jitter
SYKB23F04 Clock Buffer 4 differential outputs + 1 LVCMOS output, up to 3.1 GHz, low additive jitter

SYNK, YXC's clock IC brand, continues to expand its portfolio of clock generators, clock buffers, and related timing devices. These products provide flexible clocking options for communications equipment, industrial control systems, high-speed data acquisition, and other electronic applications.

Contact YXC for product specifications, samples, and technical support.